Artesyn COMX-P1022 Installation and Use (July 2014) - Manual (Page 34)

Hardware Preparation and Installation
COMX-P1022 COM Express Module Installation and Use (6806800M04C) 34
2.1.2 Thermal Requirements
Contact your Artesyn sales representative for current information on the detailed thermal
information including airflow and resistance of the module.
Table 2-2 Critical Temperature Spots for COMX-P1022
Component Identifier
Heat Dissipation Power
(W) Maximum Allowable
Temperature (°C)
CPU-P1022 6 Tjmax = 125
SODIMM Tcmax = 85
System Overheating
Cooling Vents
Improper cooling can lead to system damage and can void the manufacturer's warranty.
To ensure proper cooling and undisturbed airflow through the system do not obstruct the
ventilation openings of the system. Make sure that the fresh air supply is not mixed with hot
exhaust from other devices.
Personal Injury
During operation, hot surfaces may be present on the heat sinks and the components of the
product.
To prevent injury from hot surface do not touch any of the exposed components or
heatsinks on the product when handing. Use the handle and face plate, where applicable, or
the board edge when removing the product from the enclosure.