Artesyn Centellis 2000 User Card-10GE with Telco Alarm Installation and Use (May 2014) - Manual (Page 45)

Board Exchange
Centellis 2000 User Card 10GE with Telco Alarm Installation and Use (6806800M46B) 45
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag delivered together with the board and dispose of it
according to your country’s legislation.
4.3 Installing the Board
Before starting to install the board, observe the following:
To install the board into an AdvancedTCA shelf, proceed as follows.
The board is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service immediately.
Board Damage
Touching the board or electronic components in a non-ESD protected environment causes
component and board damage.
Before touching boards or electronic components, make sure that you are working in an
ESD-safe environment or wear ESD wrist straps.
The board must only be operated in a shelf that is properly grounded.