Artesyn Centellis 2000 User Card-10GE with Telco Alarm Installation and Use (May 2014) - Manual (Page 19)

Introduction
Centellis 2000 User Card 10GE with Telco Alarm Installation and Use (6806800M46B) 19
 Clock
– BCM8707 differential 156.25MHz reference clock
 SFP+
SFP+ modules
– Optical MMF module for distances up to 300m
– Copper cable assembly for distances up to 25m
 IPMI
– PICMG 3.1 compliant IPMI subsystem
 Power
– Dual -48V sourced via backplane
– Dual +3.3V management power sourced via backplane
– Local power generation of +5.0V, +3.3V and +1.0V
 Power on reset generation and power supervision
1.3 Standard Compliances
The Centellis 2000 User Card 10GE with Telco Alarm, when installed in a compliant chassis is
designed to meet the following standards:
Table 1-1 Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1 Legal safety requirements