ART Pro Audio X-15 - Ultra MIDI Controller Pedal - Manual (Page 14)

APPENDIX D
MIDI: C ONTROLLERS 8 NUMBERS
SCA LNG: SETTlN GS
CONTROLLER # CONTROLLER DESCRIPTION
1 MOD WHEEL
2 BREATH CONTROLLER
3 UNDEFINED
4 FOOT CONTROLLER X-15 LEFT PEDAL*
5 PORTAMENTO TIME
6 DATA ENTRY (msb)
7 MAIN VOLUME
8 BALANCE
9 UNDEFINED
10 PAN
11 EXPRESSION CONTROLLER
X-15 RIGHT PEDAL*
12-15 UNDEFINED
16-19 GENERAL PURPOSE #‘S 1-4
20-31 UNDEFINED
32-63 LSB FOR VALUES 0-31
64 DAMPER PEDAL (SUSTAIN)
65 PORTAMENTO
66 SOSTENUTO
67 SOFT PEDAL
68 UNDEFINED
69 HOLD 2
70-79 UNDEFINED (X-15 EFFECTS ON/OFF)*
80-83 GENERAL PURPOSE #‘S 5-8
84-90 UNDEFINED (84, X-15 BYPASS
CONTROLLER)*
91 EXTERNAL EFFECTS DEPTH
92 TREMOLO DEPTH
93 CHORUS DEPTH
94 CELESTE (DETUNE) DEPTH
95 PHASER DEPTH
96 DATA INCREMENT
97 DATA DECREMENT
98 NON-REGISTERED
PARAMETER # LSB
99 NON-REGISTERED
PARAMETER # MSB
100 REGISTERED PARAMETER # LSB
101 REGISTERED PARAMETER # MSB
102-120 UNDEFINED
121-127 NOT ASSIGNABLE TO X-15
*X-15 DEFAULT SETTINGS
Scale Set tings For Turning Effects On and Off in a Preset
The activator pads are assigned the MIDI controller numbers
as shown in the first chart. Use these controller numbers
when assigning the pad to turn the effect on or off. For ease
of use, assign the activator pad which is labeled with the ef-
fect you wish to control. The next chart lists the effects you
may control and the Scale value that must be assigned to
work properly.
PAD DEFAULT VALUES
PAD # EFFECT
1 EXCITER
2 COMPRESSOR
3 DISTORTION
4 EQUALIZER
5 EXPANDER/NOISE GATE
6 REVERB
7 DELAY
8 PITCH TRANSPOSER
9 FLANGE/CHORUS
10 SPECIAL EFFECTS
MIDI CONTROLLER #
70
71
72
73
74
75
76
77
78
79
SUGGESTED SCALE SETTINGS
EFFECT VALUE SCALE
COMPRESSOR 2:1 5
4:1 10
LIMIT 15
DISTORTION OVER DRIVE 1 5
OVER DRIVE 2 10
OVER DRIVE 3 15
DISTORTION 1 20
DISTORTION 2 23
DISTORTION 3 25
TURBO-ODRV 1 30
TURBO-ODRV 2 34
TURBO-ODRV 3 38
TURBO-DIST 1 42
TURBO-DIST 2 46
TURBO-DIST 3 50
EXPANDER
FLANGER
EXPANDER 5
N-GATE 10
EXP+GAT 15
ENVFILT 20
POST 5
PRE 10
CHORUS POST 5
PRE 10
PANNER MODULATION 50% 30
OFF (SET MOD = 0 % ) MODULATION 100% 65
PITCH TRANSPOSER QUICK 5
NORMAL 10
SMOOTH 15
DELAY 0 ms 0
245 ms 25
500 ms 38
1.02 sec 51
1.55 sec 59
1.80 62
These scale values will change between the VALUE and
OFF. Make sure your original setting is programmed and
stored to OFF or 0.
13