ART Pro Audio SGX Series - Guitar Effectss Processor - Manual (Page 17)

13
When you see text within the [ ] brackets, it is describing the text as it
appears in the LCD.
Recall preset 151.
-Press the EDIT MODE button
-Press the DELETE EFFECT once. [DEL:COMPRESSOR?]
*Do you want to delete the compressor? NO.
-Turn the Encoder knob to the right until you see [DEL:ACU ENV SIM?]
*Let's delete this effect.
-Press ENTER, [3 CMP+PTr+REV].
*The effect has been eliminated but not permanently. You will
audibly hear the sound change when the effect is deleted.
*Press STORE to make this change permanent.
-Press STORE now.
With the elimination of an effect, you open up a space to insert
another effect or leave things as they are.
If you press the DELETE EFFECT button and there are no effects in the preset, the
display will read [DEL:NO FX TO DEL].
STORE
Any time you wish to permanently save parameter values in a preset, press the
STORE button. All parameter values you have chosen will be stored into the preset
as well as TITLE, MIX, and ON/OFF Controllers information. When you press the
STORE button the LCD will display [PRESET STORED]. If the phrase [LOCKED/SELECT
LOCATION 111-200] appears don't panic, presets 1 through 110 are factory presets
and though the parameters may be changed, the new values cannot be stored without
first UNLOCKING the presets (see UTILITY section).
TO DELETE A STORED PRESET, thereby releasing its memory to be used again, you
must store a null preset at the preset number you wish to delete. A null preset
consists of a blank title (all spaces, displayed as ) and no effects
(displayed as ). Factory Preset 100 is programmed blank to make it
easy to delete stored presets. Presets 111 through 200 are null when you receive
your unit or after a factory reset.
REC/ARM
YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
To reset the SGX 2000 to record a new sample, press the REC/ARM button.
While you are using any of the Sampler algorithms you will need to "reset" the
record parameter to be ready to record another sample. The REC/ARM button allows
you to return the Sampler to Record-Ready status. Pressing this button wipes out
the existing sample.
TRIGGER
YOU MUST BE USING A PRESET SET UP
FOR SAMPLING AND IN THE EDIT MODE FOR THIS FUNCTION TO OPERATE
This button allows you to either record or play back a sample of the program
material.