Dialogic INTEGRATED MEDIA GATEWAYS 1010 - Manual (Page 55)

RADIUS Call Trace Example: Pre-paid Support
45
18:07:06.337 CALL(SIP) (01:0001:01) with R-URI: 10.129.44.254:5060
UDP
18:07:06.337 CALL(SIP) (01:0001:01) m line codec list: 0
18:07:06.337 CALL(SIP) (01:0001:01) RTP Type: 0, name: PCMU, clk: 8000
18:07:06.337 CALL(SIP) (01:0001:01) Set Fax Type to Bypass
18:07:06.337 CALL(SIP) (01:0001:01) SENT L3-L3 Outseize Ctrl to VPPL
18:07:06.337 CALL(IP) (01:0001:01) RCVD Outseize from L3, [vts 0]
[m0.0.1]
18:07:06.337 CALL(IP) (01:0001:01) RTP: (Src) 10.129.44.241:8000
18:07:06.337 CALL(IP) (01:0001:01) RTP: (Dst) 10.129.44.254:29574
18:07:06.347 CALL(IP) (01:0001:01) VoIP Codec is G711Mulaw; Payload
Size is 20ms
18:07:06.347 CALL(IP) (01:0001:01) RFC2833 DTMF Relay in use, Dynamic
Payload Type is 120
18:07:06.367 CALL(IP) (01:0001:01) SENT Outseize ACK to L3P, toPvid:
x66
18:07:06.367 CALL(SIP) (01:0001:01) RCVD Outseize Ack from VPPL
18:07:06.367 CALL(SIP) (01:0001:01) SENT Connect to L4
18:07:06.367 CALL(SIP) (01:0001:01) RCVD Cut Thru from VPPL
18:07:06.367 CALL(SIP) (01:0001:01) RCVD Connect from VPPL
18:07:06.367 CALL(L4) (01:0001:01) RCVD Connect from SIP
18:07:06.367 CALL(L4) (01:0001:01) SENT CPE of ANSWER to GCL
18:07:06.367 CALL(GCL) (01:0001:01) RCVD CPE of ANSWER from L4
18:07:06.367 CALL(GCL) (01:0001:01) SENT RADIUS ACCT START
18:07:06.367 CALL(GCL) (01:0001:01) RCVD RADIUS ACCT START
18:07:06.367 CALL(GCL) (01:0001:00) SENT Disconnect Tone to L4
18:07:06.367 CALL(L4) (01:0001:00) RCVD Disconnect Tone from GCL
18:07:06.367 CALL(L4) (01:0001:00) SENT Cancel DSP Service to SYSRM
18:07:06.367 CALL(MED) (01:0001:00) RCVD CANCEL OUTPULSE CP
18:07:06.367 CALL(MED) (01:0001:00) RCVD CANCEL OUTPULSE DIGITS
18:07:06.367 CALL(GCL) (01:0001:00) SENT CPE of ANSWER to L4
18:07:06.367 CALL(L4) (01:0001:00) RCVD CPE of ANSWER from GCL
18:07:06.367 CALL(L4) (01:0001:00) SENT Connect to SIP
18:07:06.367 CALL(L4) (01:0001:01) SENT Connect to SIP
18:07:06.367 CALL(SIP) (01:0001:00) RCVD Connect from L4
18:07:06.367 CALL(SIP) (01:0001:00) SENT 200 OK to 10.129.44.226:5060
UDP
18:07:06.367 CALL(SIP) (01:0001:01) RCVD Connect from L4
18:07:06.437 CALL(SIP) (01:0001:00) RCVD ACK from 10.129.44.226 UDP
18:07:06.437 CALL(SIP) (01:0001:00) with Via sent-by:
10.129.44.226
18:07:07.387 CALL(GCL) (01:0001:00) Releasing Call,Radius
MaxCallDuration=1 secs elapsed
18:07:07.387 CALL(GCL) (01:0001:00) SENT Park Port to L4
18:07:07.387 CALL(L4) (01:0001:00) RCVD Park from GCL
18:07:07.387 CALL(GCL) (01:0001:01) SENT Clear Response to L4
18:07:07.387 CALL(GCL) (01:0001:00) SENT Clear Response to L4
18:07:07.387 CALL(L4) (01:0001:01) RCVD Clear from GCL
18:07:07.387 CALL(L4) (01:0001:01) SENT Clear Request to SIP
18:07:07.387 CALL(L4) (01:0001:00) RCVD Clear from GCL
18:07:07.387 CALL(L4) (01:0001:00) SENT Clear Request to SIP
18:07:07.387 CALL(SIP) (01:0001:01) RCVD Clear Request from L4
18:07:07.387 CALL(SIP) (01:0001:01) SENT BYE to 10.129.44.254:5060 UDP
18:07:07.387 CALL(SIP) (01:0001:01) with R-URI: 10.129.44.254:5060
UDP
18:07:07.387 CALL(SIP) (01:0001:00) RCVD Clear Request from L4
18:07:07.387 CALL(SIP) (01:0001:00) SENT BYE to 10.129.44.226:5060 UDP