Installing usb drivers on windows vista – ARRIS WBM750 User Guide User Manual

Page 24

Installing USB Drivers on Windows Vista

Follow these steps to install USB drivers on Windows Vista.

Installing Touchstone USB Drivers on Vista in 32-bit Mode

When running Vista in 32-bit mode, simply connect your PC to the Touchstone

Wideband Cable Modem or Cable Modem. The Vista Hardware Installation Wizard

finds the correct 32-bit USB driver and installs it for you.

Installing Touchstone USB Drivers on Vista in 64-bit Mode

When running Vista in 64-bit mode, you must install an updated Vista USB 1.1

driver. Follow these steps to obtain and install the driver.

1 Download the zipped Vista USB driver from the ARRIS website at the fol-

lowing link:

2 Unzip the files to a directory that can be referenced later (Step 8) during the

installation of the USB driver.

3 Connect the USB cable between the Touchstone Cable Modem or Wideband

Cable Modem and personal computer running Vista.

4 When the Found New Hardware screen is presented, select the “Locate and

install driver software (recommended)” option.

Touchstone WBM750 Wideband Cable Modem User’s Guide