Installing usb drivers on windows 2000 – ARRIS WBM750 User Guide User Manual

Page 18

Installing USB Drivers on Windows 2000

Follow these steps to install USB drivers on Windows 2000.

1 Make sure the Wideband Cable Modem is on (the Power light should be on).

If not, connect the AC adapter as described in

2 Insert the CD that came with the Wideband Cable Modem package into the

CD-ROM drive.

3 Plug the appropriate end of the USB cable into the Wideband Cable Modem

and the other end into the computer’s USB port.
The following window appears, indicating that the PC has detected a new

USB device:

4 Wait for the system to start the installation wizard and display the following

window (there may be a short delay):

Touchstone WBM750 Wideband Cable Modem User’s Guide