Argox OS Series - Manual (Page 8)

14
Control /
Indicator
Function
Power Switch
 On: turns on normal operation
 Off: turns off power
Note: Turn power off before connecting or
disconnecting cables
Power Indicator
 Green light shows the power-on
 Light off shows the power-off
 Blinking light indicates error has occurred
Ready Indicator
 Green shows printer is ready to operate
 Blinking light indicates printer is paused or
data transferring
 Seagull driver status monitor
Feed Button
 Press to advance labels to the first printing
position
 Press to take the printer out of "pause"
 Press and hold while turning on the power
to print out a configuration profile
15
Loading Ribbon and Media
This section describes how to load ribbon and media in the OS
Series printer.
Loading Ribbon
Note: This section does not apply to direct thermal printing.
1. Lift the top cover to expose the media compartment.
2. Unlatch the print head module by pushing the two white
release levers on the sides toward the rear.
3. Turn over the print head module to expose the ribbon
supply holder.