Aplex Technology ACS-2685 - Manual (Page 33)

ACS-2685 User Manual 33
33. JCF/JSATA:
(2.0mm Pitch 3x4 Pin Header), it provides selectable IDE_CF1 or SATA4 signal output
control.
Functio
n
Jumper setting
SATA
4
(Default
)
IDE_CF
1
(option)
34. SATA_P1/SATA_P2:
(2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to
provide power for SATA devices.
Pin# Signal
Name
1 +DC5V
2 Ground
Note:
Output current of the connector must not be above 1A.
35. SATA1/SATA2/SATA3/SATA4:
(SATA 7P), SATA Connectors, Four SATA connectors are provided, with transfer speed
up to 3.0Gb/s.
(Option):
ASB-M801ET/EB: SATA1/SATA2/SATA3 drives supporting RAID 0 or RAID 1
function.