Aplex Technology ACS-2685 User Manual
Page 28
ACS-2685 User Manual
28
19. JCOM6:
(2.0mm Pitch 1x3 Pin Header) COM6 setting jumper, pin 1~3 are used to select signal
out of pin 10 of COM6 port.
JP1 Pin#
Function
Close 1-2 COM5 Pin10=+5V (default)
Close 2-3
COM5 Pin10=+12V (option)
20. COM6:
(2.0mm Pitch 2X5 Pin Header), COM6 Port, standard RS232 ports are provided. They
can be used directly via COM cable connection. COM6 port is controlled by pins
No.
1~3
of JCOM6,select output Signal 5V or 12v, For details, please refer to
description of JCOM6.
Signal
Name
Pin# Pin# Signal Name
DCD
1
2
RXD
TXD
3
4
DTR
Ground
5
6
DSR
RTS
7
8
CTS
RI
9
10
JCOM6
select Setting
21. USB4/USB5/USB6/USB7:
(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0 ports,
speed up to 480Mb/s.
22. LAN1/LAN2:
(RJ45
Connector
),
Rear LAN port, Two standard 10/100/1000M RJ-45 Ethernet ports
are provided. Used Intel 82574L chipset, LINK LED (green) and ACTIVE LED (yellow)
respectively located at the left-hand and right-hand side of the Ethernet port indicate
the activity and transmission state of LAN.