Aplex Technology ARCHMI-716 - Manual (Page 38)

ARCHMI-7XX (SBC-7106A) User Manual 37
32. LINE_OUT:
(Diameter 3.5mm Jack), HD Audio port, An onboard Realtek ALC662 codec is
used to provide high quality audio I/O ports. Line Out can be connected to a
headphone or amplifier.
33. USB45:
USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4
USB2.0 ports, High-speed USB 2.0 allows data transfers up to 480
Mb/s ,support USB full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.
34. LAN1/LAN2:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used intel 82574L chipset, LINK LED (green)
and ACTIVE LED (yellow) respectively located at the left-hand and right-hand
side of the Ethernet port indicate the activity and transmission state of LAN.
35. BUZ1:
Onboard buzzer.
36. CN2:
(DF13-30P Connector), For expand output connector, It provides eight GPIO,
one RS422 or RS485, one USB2.0,one Power on/off, one Reset.