Aplex Technology ARCHMI-716 - Manual (Page 36)

ARCHMI-7XX (SBC-7106A) User Manual 35
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 JP2 select Setting (RI/5V/12V)
22. JP4:
(2.0mm Pitch 2x2 wafer Pin Header), USB0(CN1) or Touch jumper setting.
JP4 Function
USB0 (CN1) Touch(TCH1)
Close 3-4(default) - Yes
Open 3-4(option) Yes -
Open 1-2(default) -
23. TCH1:
(2.0mm Pitch 1x6 wafer Pin Header), internal Touch controller connector.
Pin# Signal Name
1 SENSE
2 X+
3 X-
4 Y+
5 Y-
6 GND_EARCH
24. LED1, LED2, LED3 (option):
LED1: LED STATUS. Green LED for Motherboard Power status.
LED2: LED STATUS. Green LED for Motherboard Standby Power Good status.
LED3: LED STATUS. Green LED for Touch Power status.
25. SATA_P:
(2.5mm Pitch 1x2 box Pin Header), One onboard 5V output connector are
reserved to provide power for SATA devices.
Pin# Signal Name
1 +DC5V
2 Ground