Aplex Technology ARCHMI-716 - Manual (Page 101)

ARCHMI-7XX (SBC-7106A) User Manual 100
Plot Calibration Data Check this function and a touch panel linearity
comparison graph appears when you have
finished Advanced Calibration. The blue lines
show linearity before calibration and black
lines show linearity after calibration.
Turn off EEPROM storage The function disable for calibration data to
write in Controller. The default setting is
Enable.
Setting
Touch Mode This mode enables and disables the mouse’s ability to drag
on-screen icons – useful for configuring POS terminals.
Mouse Emulation – Select this mode and the mouse
functions as normal and allows dragging of icons.
Click on Touch – Select this mode and mouse only provides
a click function, and dragging is disables.
Beep Sound Enable Beep Sound – turns beep function on and off
Beep on Pen Down – beep occurs when pen comes down
Beep on Pen Up – beep occurs when pen is lifted up
Beep on both – beep occurs when comes down and lifted
up
Beep Frequency – modifies sound frequency
Beep Duration – modifies sound duration
Cursor Stabilizer Enable the function support to prevent cursor shake.
Use press and hold as
right click You can set the time out and area for you need.