Apantac TAHOMA Platform User Manual
Page 21
APANTAC LLC ● 7556 SW BRIDGEPORT ROAD ● PORTLAND, OR 97224, USA
PHONE +1 503 616 3711 ● FAX +1 503 389 7921 ●
●
WWW.APANTAC.COM
Page 21 of 67
Figure 4: Tahoma LE-4 rear panel view
1. RJ45: Reserved for future use
2. RJ45: For DVI/HDMI/VGA output with built-in extenders up to 2048x1080 @115ft
(35 meters) with optional active receiver. Passive receivers supports up to 35 feet.
3. BNCs: Input for video (auto-detect PAL/NTSC, HD/SD-SDI, and 3G HD-SDI)
4. Rotary Switch: reserved for future use
5. RJ50: GPI/O for control, alarm and tally
6. RJ45: RS232 serial
7. RJ45: IP control
8. SCSI connector: for discrete audio and GPI/O
9. BNC: Line level AES audio monitor output*
10. BNC: LTC input to sync on screen clocks
11. Phone Jack: Line level stereo audio monitor output*
12. Redundant DC Power Supply 12V
13. AC Power – 90 to 250 50/60Hz
*Audio monitoring is available in line level in stereo and AES
25B