Apantac TAHOMA Platform - Manual (Page 11)

APANTAC LLC ● 7556 SW BRIDGEPORT ROAD ● PORTLAND, OR 97224, USA
PHONE +1 503 616 3711 ● FAX +1 503 389 7921 ● [email protected] ● WWW.APANTAC.COM
Page 11 of 67
*Flexible Outputs – LI-8 examples:
Output(s)
1 2
Inputs 4 4
Inputs 8
Tahoma-LI-12 / LI-16: The 2RU Tahoma LI accepts 8-16 SD-SDI, HD-SDI signals, has a
looping output for every input, and comes standard with 16 channels of embedded audio per
every SDI video input. The LI-12 / LI16 has four flexible DVI/HDMI (1.2/1.3)/VGA outputs*
with user selectable resolutions up to 2048x1080. Analog or AES audio options can
be added
at any time during or after the purchase.
*Flexible Outputs – LI-16 examples:
Output(s)
1 2 3 4
Inputs 4 4 4 4
Inputs 4 4 8
Inputs 8 8
Inputs 12 4
Inputs 16
LX Series
Note: The LX series does not support analog composite inputs.
Two types of mechanical frames are available for the Tahoma LX family:
1. Tahoma-LX-4 / LX-8 / LX16: The 1 RU Tahoma LX-4 / LX-8 / LX16 has a built-in
16x16 SDI routing matrix switch that supports any input to any output. It accepts 4-16
various video standards (SD-SDI to HD-SDI) and comes standard with 16 channels of
embedded audio per every SDI video input. The LX-4 / LX-8 / LX16 has up to 4 flexible
DVI/HDMI (1.2/1.3) / VGA outputs* with user selectable resolutions up to 2048x1080.
Analog or AES audio options can be added at any time during or after the purchase.