AMETEK HPD Series Operation Manual - Manual (Page 19)

Section 1. Features and Specifications
Mechanical Specifications
Mechanical Specifications
Front Panel Voltage and Current
Control
Front Panel Voltage Control
Resolution
10-turn voltage and 1-turn current
potentiometers (10-turn current control
optional)
0.02% of maximum voltage
Front Panel AC Input Power Switch Push ON/push OFF switch
Front Panel Voltage and Current
Meters Independent 3-digit green numeric LED
display and analog bar graph displays for
current and voltage. For meter accuracy, see
Table 1.2 .
AC Input Connector Type IEC 320 Connector, appropriate power cord for
destination country.
Front Panel Output Connector Three binding posts: positive (+),
negative (–), and ground.
Rear Panel Output and Sense
Connector Four terminal barrier strips. The 60 V unit is
shipped with a 4-terminal output block.
Chassis Ground Front panel binding post and power cord safety
ground.
Cooling Convection cooled. Air enters the unit from the
bottom and lower sides and exits from the
upper sides and top.
Mounting Optional rack for mounting several units in a
standard rack. Can be combined with 60 watt
series units. See
“Rack Mounting” on page 10 .
Approvals CSA certified to UL 1012, and CSA C22.2 No.
107.1
FCC Part 15B and Industry Canada Class A
CE Marked for Low Voltage Directive and
EMC Directive (Class A emissions)
7