AMETEK HPD Series Operation Manual - Manual (Page 15)

Section 1. Features and Specifications
Rear Panel Connectors and Outputs
Figure 1.2 shows the programming interface indicators for units that have a digital
programming interface installed.
Figure 1.2 Remote Programming Interface Indicators
Rear Panel Connectors and Outputs
Figure 1.3 shows the connectors and outputs available at the rear panel. ( Figure 1.3
shows the 15 V or 30 V low voltage model.)
Figure 1.3 Rear Panel
Note
The power supply is shipped with jumpers for local sensing of the output voltage. See
“Local Sensing” on page 17 .
3
Remote Programming LED (REM)
Shutdown LED (SRQ)
OVP Adjust Potentiometer (OVP ADJ)
OVP Shutdown (OVP)