Windows vista 32/64 systems, Windows xp systems – Zilog ZMOT0BHH User Manual
Page 28
UM023902-1013
24
ZMOTION
®
20-Pin Detection and Control Development Kit
User Manual
Windows Vista 32/64 Systems
Observe the following steps to install the USB Smart Cable on a Windows Vista system.
1. Connect the USB Smart Cable to a USB port on the development PC.
2. After the PC detects the new hardware, it will display the Found New Hardware Wiz-
ard dialog box. Click
Locate and install driver software (recommended)
.
3. Depending on your development PC’s User Account Control settings, Windows may
ask for permission to continue the installation. Click
Continue
.
4. When the Insert the Disc dialog appears, select
I don’t have the disc. Show me
other options
. Click the
Next
button to display the Windows couldn’t find driver dia-
log.
5. Select
Browse my computer for driver software (advanced)
to display the Browse
For Driver dialog, which prompts you to key in or browse for the location of the
driver’s
.inf
file. Depending on the type of computer you use (32- bit or 64-bit), use
the
Browse...
button to navigate to one of the following paths, then click the
Next
but-
ton.
On 32-bit Vista systems, navigate to:
II Installation>\device drivers\USB\x32 On 64-bit Vista systems, navigate to: II Installation>\device drivers\USB\x64 6. When the Windows Security dialog prompts you whether to install or not install, click Install this driver software anyway and wait until the installation is completed (Win- dows may prompt you more than once). 7. When the software has been installed successfully, click Close . Windows XP Systems Observe the following steps to install the USB Smart Cable on a Windows XP system. 1. Connect the USB Smart Cable to a USB port on the development PC. When the PC detects the new hardware, it will display the Found New Hardware Wizard dialog. 2. In the Wizard, select Install from a list or specific location (Advanced) , then click Next . If the Windows Hardware Installation dialog appears, click Continue Anyway . 3. In the Please choose your search and installations dialog, select Search for the best driver in these locations and include this location in search . 4. Use the Browse... button to navigate to one of the following paths: Note: