beautypg.com

Figure 13. usb smart cable serial number register – Zilog ZUSBOPTS User Manual

Page 26

background image

UM025503-0814

The Zilog Educational Platform as a Development Board

Zilog Educational Platform

User Manual

20

7. In the Debug Tool pane at the bottom of the Project Settings dialog, select

USBSmart-

Cable

from the

Current:

drop-down menu (if it is not already selected); see Figure 13.

8. Click the

Setup

button in this Debug Tool pane to prompt ZDS II to recognize the

serial number of your USB Smart Cable (seen in the Setup USB Communication dia-
log in Figure 13).

9. Click

OK

to exit the Project Settings dialog.

10. Locate the USB Flash drive that shipped with your Kit and insert it into a USB port on

your PC.

Figure 13. USB Smart Cable Serial Number Register

See also other documents in the category Zilog Sensors: