Xtramus NuApps-POE V1.0 - Manual (Page 9)

5
E-Mail: [email protected]
Http://www. X tramus.com
XTRAMUS TECHNOLOGIES®
3. NuPOE-32EL Setting
Before NuApps-POE start, user must set the connection of NuPOE-32EL with PoE
PSE device.
The setup diagram as below:
1) User can connect NuPOE-32EL to PoE PSE device via Port 1 and Port 3 on the
every module slot
2) User can connect NuPOE-32EL to Ethernet tester via Port 2 and Port 4 on the
every module slot.
3) The port 2 on the first slot, on the left side of NuPOE-32EL, is the exclusive port of
the connection between the NuPOE-32EL and PC with NuApps-POE.
4) The function of Port 1 and Port 2 on the first slot is for the cascade.