Xtramus NuApps-POE V1.0 - Manual (Page 23)

19
E-Mail: [email protected]
Http://www. X tramus.com
XTRAMUS TECHNOLOGIES®
After all the settings are complete, press the button Apply for each individual port or
Apply All for all the ports at once. A message for settings complete will appear. Press
the individual Request button(s) or the On All button to run loading. Press
the individual Request button(s) or the Off All button to stop loading. At
last, click Close button to exit the browse setup.
It is available to save or to load a configuration by click Load Cfg button or Save Cfg
button at the left lower corner.
PD class is based on IEEE 802.3af standard.
PD Class Usage PD Standard Watt
0 Default 0.44 ~ 12.95
1 Optional 0.44 ~ 3.84
2 Optional 3.84 ~6.49
3 Optional 6.49 ~ 12.95
4 Optional --- *
* Class 4 is currently reserved.