WaveWare Call Manager - Manual (Page 15)

STEP 3 – Configure Input Protocol – Wired Call System
Click on the “ Protocol ” Option to be used as shown in Step 3. See Fig. 19
Choices are: TAP , COMP2 and Scope Protocols.
Fig. 19
Click on the “ Configure Input COM Port ” Button as shown in Step 3. See Fig. 20
Fig. 20
Configure the TAP / COMP2 Inputs, Default settings are shown below. Click “ OK ” when Finished. See Fig.21
Fig. 21
Step 4 is Next.
15