WaveWare Call Manager - Manual (Page 29)

STEP 10 – Register Receivers
Click on the “ Register Receivers ” Button as shown in Step 9. See Fig. 41
Fig. 41
In this Step, you are Registering Inovonics Receivers, so that you can use them to help Identify the Closest
Receiver Location to the Alert Call Device by Comparing the Signal Strength.
Chose the “ Site Survey Device ” you wish to use to Perform this Survey with. See Fig. 42
You should find the Serial Number of the Device (via a Labeled on the Device) that matches in the Dropdown List.
You can also see the same Devices on Page 24 ( Step 9 ): “ Register Call Devices ”, under the Inovonics “ Wireless
System Input Port ” Section.
After Choosing the Device to use for the Site Survey, simply “ Trigger ” the device and All the Pre “ Registered
Receivers ” in Range will be Displayed and show their Signal Strength (Margin).
You should Name the Receiver by Clicking on the Name Field. See Fig. 43
Fig. 42 Fig. 43
You can Delete a Receiver by Highlighting the Name and Clicking the “ Delete ” Button . Click “ OK ” when Finished.
Step 11 is Next.
29