Adsl 2+ modem router quick set-up guide – Dynalink RTA1320 User Manual
Page 9
ADSL 2+ Modem Router Quick Set-up Guide
a public IP directly from the ISP. This arrangement is suitable for certain advanced
applications that require the device behind to receive a public WAN IP.
Caution: This mode of operation assumes firewall security will be provided by
another device on your LAN.
To set up IP extension, go to the Advanced menu. Select
WAN > Internet. Click
on the “modify icon” under
Edit:
The next screen displays VPI and VCI as 0 and 100. Do not change these numbers.
Go
Next. Select PPPoA VC MUX or PPPoE LLC/SNAP. If your ISP did not specify
PPPoE you can assume it is PPPoA. Go
Next.
On the next screen untick
Enable NAT, and tick PPP IP extension as illustrated.
Go
Next.
Enter your Internet account user name and password. Go
Next.