Top Global MB6800 - Manual (Page 20)

Top Global USA. ----MB6800 User Guide
- 20 -
 Enable SNMP: It allows the administrator can manage the MB6800 through the
SNMP protocol. At the same time, you must specify the Read-Only communicate
Name and Read-Write communicate Name, which enable the SNMP Manager to
access MB6800 safely. Also, MB6800 supports to send trap information to a remote
trap server to report the status of devices. Enable SNMP trap option, you must
specify the IP address of Trap server and Trap interval, which indicates the
frequency of the device for sending trap information to the server.
 Enable RCM: It makes MB6800 to be managed through RCM. You need to specify
the RCM server „s IP address or hostname and the domain. You can get and modify the
MB6800 ‟s configuration information from RCM administrator.
3.4.1.2 Time
Figure 3- 8 Time
 Current time: Synchronize local time with Internet time server will be displayed.
Time zone: Current country time zone. You should check Enable Daylight Saving
Time if implement DST(Daylight Save Time) in your country.
 Time setting: You can enable/disable synchronize local time with Internet time
server by checking Automatically synchronize with Internet time server. The
default value of the NTP server‟s IP address is 207.46.130.100, and this value can be
changed as your requirement.