Thrustmaster Ferrari F1 RS - Manual (Page 473)

10/22
Setting the Wheel’s “SENSITIVITY” in “EMULATION” mode:
In these games, your wheel’s steering has 2 sensitivity modes:
- “High Sensitivity” (default mode).
This mode is used to remove the steering axis’s central dead zone (a zone which naturally exists on
the gamepad).
- “Normal Sensitivity” (requires setup).
This mode is used to keep the steering axis’s central dead zone (a zone which naturally exists on
the gamepad).
• Setting “Normal Sensitivity” mode:
Action LED status
Press the following buttons at the same time:
D-Pad + L3 + R3
BLINKS
Your wheel’s steering is now in normal sensitivity
• Setting “High Sensitivity” mode (default mode):
Action LED status
Press the following buttons at the same time:
D-Pad + L3 + R3
DOES NOT BLINK
Your wheel’s steering is now more sensitive, especially in the center
- In these games, if the cursor moves on its own in the menus, enable the “Normal Sensitivity” mode
to solve this problem.
Setting the intensity of the “AUTOMATIC RETURN TO CENTER” in “EMULATION” mode:
In these games, your wheel automatically returns to the center.
You can adjust the intensity of this return to center (and so modify the steering's stiffness).
• “Low” Return to Center:
Action Result
Press the following buttons at the same time:
MODE + L3 + R3
LOW RETURN TO CENTER:
(and wheel less hard to turn)
• “Normal” Return to Center (default mode):
Action Result
Press the following buttons at the same time:
MODE + L3 + R3
NORMAL RETURN TO CENTER:
(and wheel harder to turn)