Thrustmaster Ferrari F1 RS - Manual (Page 10)

9/20
INSTALLATION ON PLAYSTATION®3
1. Connect the pedal set to the steering wheel by plugging in its connector (11) at the back of the
wheel.
2. Connect the mains adaptor to the wheel (13) by plugging in its connector to the back of the wheel.
3. Connect the mains adaptor to its mains adaptor power cable (14).
Note: To be sure that the 2 elements are perfectly connected, push the power cable’s connector into
the mains adaptor socket firmly.
4. Connect the mains adaptor power cable (14) to a socket.
5. Connect the wheel’s USB connector (12) to the PlayStation  3 system’s No. 1 port.
You are now ready to play!
AUTOMATIC CALIBRATION FOR THE WHEEL AND PEDALS
The wheel calibrates itself automatically once the mains adaptor and the USB connector are connected.
This operation will cause the steering wheel to move quickly 1080° to the left and right before coming
to its final position in the center.
CAUTION:
When calibrating the steering wheel
never touch the wheel
(this may mislead the calibration or cause injury).
The pedals are also calibrated automatically once they have been pressed a few times.
TROUBLESHOOTING & TIPS
- My wheel and my pedals don’t work correctly or appear to be improperly calibrated:
Switch off your PlayStation

3 system, completely disconnect your wheel including all cables (with
the mains adaptor and the pedal set) and restart your game.
- In order for the T500 RS wheel to work with Gran Turismo® 5, you must install the automatic
updates for the game (available once you are connected to the Internet).
- There are various tips and help features (not included in this manual) available on the website
http://ts.thrustmaster.com in the Technical Support category.