Thrustmaster Ferrari F1 RS - Manual (Page 325)

18/22
TURNING THE PEDAL SET POSITION OVER
The “T500 RS” pedal set has a unique design (patent pending) that allows for a choice of 2
positions:
- Floor position (F1 type)
- Suspended position (GT/Rally type)
By default, the pedal set is delivered in “Floor” position (F1 type)
Floor position (F1 type) Suspended position (GT/Rally type)
REVERSING THE PEDAL SET PHYSICALLY
- Using the 2mm Allen key (19) loosen the 4 screws holding the “Removable Foot Rest (15)”
- Turn the pedal set over 90° then tighten the "Foot Rest" again on the 4 screw threads located on
the "Arch (16)”