Thor 4 Ch HD Analog or Digital to HDTV modulator - Manual (Page 25)

4-ADHD
22
IP Output
Click “IP Output” from the left menu, it will display the screen as Figure-8 where to configure the 4
IP SPTS Output.
After setting the parameters, click “Apply” to save the setting.
Figure-8
Modulator Setting
This unit is equipped with 4 adjacent frequency output. User can configure 4 carrier outputs here.
NOTE: Different modulation standards have different bandwidths. (see specifications in Chapter 1).
After setting all the parameters, click on “Apply” to save the Modulator parameters.