Thor 4 Ch HD Analog or Digital to HDTV modulator - Manual (Page 17)

4-ADHD
14
frequency and confirm by press ENTER button.
 RF level
The RF attenuation range is from -30~-10dbm (81~97dbµV) with 0.1db step. After entering this
setting submenu, shift UP/DOWN/LEFT/RIGHT key to set the output level and press ENTER to
confirm.
 ASI Output:
THOR 4-ADHD encoder & modulator (DVB-C Modulating) has a quad-carrier output A, B, C, D
and 1 ASI output E.
Output A: the ASI output programs are same as carrier output A.
Output B: the ASI output programs are same as carrier output B.
Output C: the ASI output programs are same as carrier output C.
Output D: the ASI output programs are same as carrier output D.
Output E: the ASI output programs are set separately.
NOTE: The setting principle of “3.2”, “3.3”, and “3.4” are the same with “3.1” explained above.
4) TS Config
Enter each menu to configure the TS ID and Original Network ID for the 4 carriers and ASI output.
ASI Output
Output A
RF Frequency
750.000 MHz
RF Level
-10.0 dbm
4.1 Output A
4.2 Output B 4.3 Output C
4.4 Output D
4.5 Output E