Thor 4 Ch HD Analog or Digital to HDTV modulator - Manual (Page 21)

4-ADHD
18
Figure-3
You can choose the output program from 4 carriers(A, B, C, D) or ASI(E).
Further assistance if necessary
Click this button to apply the default settings of Input 1
Click this button to apply the modified parameters.
…..………………………………..... NOTE ……..……..………………………….
The different combination of Video Format, Video Bit-rate, Low delay Mode and the Resolution
of signal source will have an impact on the latency. Please refer to the Appendix attached for
detailed information.
…………………………………………………………………………………………..……
General Settings
for the input
programs: User can
edit any item listed
as needed.
Program 1 Program 2
Video Status: Green light
indicates the corresponding
source cables are properly
connected.
Encoding Status—Green light
indicates the encoding
process is running normally,
which otherwise turn to red.