Thor 4 Ch HD Analog or Digital to HDTV modulator - Manual (Page 15)

4-ADHD
12
“Parse Program” is for checking the quantity of input programs from the corresponding Tuner
input.
“Mux Program” is for selecting programs from the ASI IN to output via corresponding carrier output
or ASI output (A, B, C, D, E optional). Move the triangle mark to specify the program and press
RIGHT/LEFT keys to shift the mark between “√” and “X”. (“√”: to output the corresponding
program; “X”: not to output the corresponding program)
3) Modulator Setting
When entering “Modulator” submenu, configure the modulating parameters for the 4 carrier output
separately:
As the 4-ADHD (DVB-C Modulating) has 4 carrier outputs, “3.1”-“3.4” represent the “Carrier A”,
“Carrier B”, “Carrier C”, and “Carrier D” respectively. User can enter “3.1”/“3.2”/“3.4”/“3.4” to set
the corresponding modulating parameters. Submenus (taking “3.1” as an example) are as below:
► 1 GXTV √
2 SZTV X
2.3.1 Parse Program
2.3.2 Mux Program
3.1 Output A
3.2 Output B 3.3 Output C
3.4 Output D
3.1 Output A
3.1.1 RF On
3.1.2 Standard
3.1.5 RF Frequency
3.1.6 RF Level
3.1.3 Constellation
3.1.4 Symbol Rate
3.1.7 ASI output
► Output A Mux
Output B Mux