Thor 4 Ch HD Analog or Digital to HDTV modulator - Manual (Page 13)

4-ADHD
10
“2.1 Input 1” and “2.2 Input 2” respectively represent the two encoding boards and there are two
programs under each input. User could enter each program to set the interface as per the signal source
and set the related video & audio parameters.
“Interface”: Connect the signal source to the corresponding input channel and select the interface
from the options provided in the submenu (CVBS, HDMI optional). Press Enter key to confirm and
the system will automatically search the signal source.
“Video Format”: the encoding module supports both MPEG2 and MPEG4 AVC/H.264 formats.
Move the triangle mark with LEFT/RIGHT keys to specify the intended format and press ENTER to
confirm.
2.1 Input 1
2.1.1 Program 1
2.1.2 Program 2
Video in status
Interface
Video Format
Video Bitrate
Low Delay
Low Delay
Normal
Interface
CVBS
Video Bit Rate
08.000 Mbps
Video Format
MPEG-2
Video
Audio
Program Info
Video in status
Locked