Tempest Thunder - Manual (Page 38)

Thunder Enclosure User Manual page 38
This RDM interface provides a graphic view of the various sensor functions supported by DEC3.2
and up
Important:
Check that your RDM interface vendor has tested his interface with Tempest enclosures and all
other RDM devices you plan to use on the same network.
Firmware Upgrade over RDM
DEC3.3 firmware
is field-
upgradeable,
using RDM. A field
upgrade requires a
JESE RDM TRI MK1
interface to be
connected to the
DMX network on
which the DEC3.3
is located, and the
use of JESE GetSet
software. The kit
is available from
Tempest under
part # 2000.190.