Tempest Thunder User Manual
Page 17
Thunder Enclosure User Manual
page
17
Connect AC Wiring to MiniDEC Controller
Single Feed Operation
Split Feed Operation
Single Feed Wiring
Feed the controller with a single maintained supply. The light must be switched off when needed using
the lighting control system.
Thunder ships configured for single feed wiring operation.
DO NOT CONNECT SINGLE FEED WIRING TO THE OUTPUT OF A DIMMER.
Dual Feed Wiring
You may switch off the supply to the light without interfering with the cooling fan operation. Connect
feeder wires as shown, AND CUT THE COPPER LINK ON THE MiniDEC BOARD IN TWO PLACES, AS
SHOWN. Fan circuit should be maintained 24/7.
NEUTRAL
GROUND
LIVE (Fan)
LIVE (Light and Fan)
LIVE (Light)
CUT LINK 2
PLACES FOR
SPLIT FEED
OPERATION
NEUTRAL
GROUND