Tempest Thunder - Manual (Page 16)

Thunder Enclosure User Manual page 16
Which type of controller do you have?
If you have the DEC3 control option, there will be a panel on
the back of your enclosure like this.
Turn to the DEC3 Appendix (Section 11) at the back of this
manual for wiring and operation instructions.
If you do NOT have the DEC3 display, your enclosure is
equipped with a MiniDEC controller. Please use the
following instructions.
Accessing the MiniDEC Controller
Remove the enclosure cover.
Remove the MiniDEC cover under the fan. You will see the MiniDEC circuit board on the inside of the
MiniDEC cover.
Bring your AC supply to the conduit entry under the MiniDEC cover.
Note: use the conduit entry point outside the electrical cover for DMX wiring.
Lamp
Heater Fan Relay On DMX Temp
ESC OK