Tempest Thunder - Manual (Page 19)

Thunder Enclosure User Manual page 19
4
Mounting the Luminaire
 If the Thunder enclosure is suspended from a ceiling or overhang, this must be done by two people.
1. Place the equipment on the equipment tray. If hanging the equipment upside-down, one person
must hold the equipment in position, while another person secures it in place. Ensure that the
equipment is securely held before proceeding further.
2. For most theatrical lights, adjust the yoke to the shortest available setting before installing in the
enclosure, as shown here.
3. Move the Unistrut Channel nut into position, to line up with the fixture yoke.
4. Bolt through the yoke into the channel nut and tighten firmly in place, using the hardware
provided.
NOTE: Mounting the Atomic Strobe in the 6660 Enclosure
The Atomic Strobe enclosure has its window on the SIDE of the enclosure, and the strobe faces
sideways, mounted on two M12 spring-bolts provided.
Adjust the position of the spring bolts in the Unistrut to correspond with two of the mounting holes in
the Atomic Strobe yoke.