Tempest Thunder - Manual (Page 20)

Thunder Enclosure User Manual page 20
5
Connect Luminaire power and DMX
1. Connect the DMX IN and OUT luminaire connections as specified by the luminaire
manufacturer
2. Connect the luminaire power cable to the IEC outlet provided on the MiniDEC controller. If
necessary, shorten the length of the luminaire power
cord and install the rewireable IEC plug provided with
your Thunder enclosure.
3. Test all luminaire functions.
4. Replace MiniDEC Cover.
5. Replace enclosure cover and secure all latched tightly.
Closing the Thunder Enclosure
The latch tension is adjusted
by turning the screw –
clockwise to tension, anti-
clockwise to loosen.
Insert a padlock in
one or more security
rings for additional
security.
