Televes T.0X DVBS2-COFDM CI TWIN MUX 3TP(2SAT):2CH - Manual (Page 13)

EN
13
4.3 Amplifiers
OPTION “A” - 5575 OPTION “B” - 451202
It features two input connectors, to allow mixing of channels coming out from
two different systems. If only one of the inputs is used, it is recommended to
load the unused input with a 75 ohm terminator, ref 4061.
On its front upper part, it features a test socket (-30 dB) as well as the RF output
connector.
As the rest of T.0X units, this amplifier is powered via the 24 Vdc power BUS.
Broadband amplifier in shielded zamak chassis, with gain configured by the installer.
1
3
2
4
5
6
7
02340038001 002
BROADBAND AMPLIFIER PWR
TEST (-30dB)
1. RF output
2. Test output
3. RF input 1
4. RF input 2
1. Mains input (196- 64 V~ 50/60 Hz)
2. Ground terminal
3. ON/OFF LED
4. MATV input / Return channel output
5. MATV input test
6. MATV output test
7. MATV output / Return channel input
5. Powering input
6. Status LED
7. Attenuator
I. max 150mA 196-264V~ 50/60Hz Fuse: T1A L 250V
USO EXCLUSIVO EN INTERIOR
FOR INDOOR USE ONLY
¡¡¡ATENCIÓN!!!
NO ABRIR. TENSIONES ELEVADAS DENTRO
¡¡¡WARNING!!!
DO NOT OPEN. LIVE PARTS INSIDE
Test IN -20 dB MATV
10 dB 10 dB
C. Ret
OK - Return
OK - MATV 20 dB 20 dB
Test OUT -20 dB MATV
+10 dB
C. Ret
On
Ret. IN Ret. OUT
MATV 20 dB
02340019 002
1 2 3 4 5 6 7