TEKVOX MMX88 Matrix Switcher User Manual
Page 27

Modular Matrix Switcher 8x8 (with Audio)
22
12
、Recall the preset command [Y]: Recall[Y].
Example: “Recall5.” to recall the preset command No.5.
13
、Clear the preset command [Y]: Clear[Y].
Example: “Clear5.” to clear the preset command No.5.
14
、EDID management command:. EDIDM[X]B[Y].
Example: “EDIDM5B3.” to enable input 3 to learn the EDID data of output 5.
15
、Command for signal cards: USER/[Y]/[X]*****.
Example: “USER/I/7:0623%;” to set the input 7 to support YPbPr signal, the card is
plugged in the second input slot of the matrix.
This manual is related to the following products: