Daitsu LCD Display & TV - Manual (Page 15)

15
ENGLISH
Connecting the Power Cord and Switching the TV On / Off
1
Make sure all the necessary connections have been made.
2
Press the POWER( ) button to switch the TV on.
3
Select the favorite source by pressing the TV/AV ( ) button
one or more times.
■ The Input Source ( ) is displayed in following order :
TV ➔ SCART1 ➔ SCART2 ➔ AV2 VIDEO ➔
AV2 S-VIDEO ➔ COMPONENT1 ➔ COMPONENT2 ➔
RGB ➔ DVI
■ The Video( ) is displayed in the following order :
SCART1 ➔ SCART2 ➔ AV2 VIDEO ➔ AV2 S-VIDEO
Selecting a Picture from External Sources
After your various systems (audio and video) have finished, you can view any of the
sources by selecting the appropriate external input.
1
Press the MENU button.
2
Press the (¥Š) button to select the Setup Group.
3
Press the ( ›‚ ) button to select the Language and
then press the OK button.
4
Select the appropriate language by pressing the ( ›‚ )
button and then press the OK button.
■ You can select English, Français, Deutsch, Italiano,
Español, Dutch, Português.
5
Press the MENU button to return to the previous menu.
Selecting your Language
When you start using your TV for the first time, you must select the language in which to
display all on-screen menus.
1
Connect the power cord for your TV to the power inlet on the
back of your TV.
2
Plug the power cord for the TV into a nearby outlet, and turn
on the power switch on the back of your TV.
3
Press the POWER, CH button on the front panel of your set
or press the POWER( ), CHANNEL( ›‚ ) button on the
remote control.
After the green LED lamp switch on and your TV will be
turned on.
4
To switch your TV off, press the POWER( ) button again.
Picture Audio Timer Install Setup Option
Language English
Geometry
Aspect Auto
Favorite Channel
No WSS Full
PIP Adjustmant
Factory Preset
:Position MENU:Previous EXIT:Exit
Language
English
Français
Deutsch
Italiano
Español
Dutch
Português
/OK:Select Language