Signamax 100BaseTX To 100BaseFX Converters - Manual (Page 21)

Signamax 065-1100NS/1110NS/1120NS Series
100BaseTX/FX Media Converter
Appendix A 15
A
A
PPENDIX A
Cables
The following are some recommendations as to what you should
and should not do when installing cables. Remember - cables are
the deciding factor in network performance.
24mm
6mm
Try to
maintain
a bend
radius of
(min.) 4x
the diameter
of the cable
for UTP and
100x for fiber.
Try not to
allow the
cable to
twist too
much - this
creates a
strain on
the internal
cables.
Place cable ties
at regular
intervals - do
not over tighten
cable ties - try
to avoid using
with fiber.
Do not stretch
the cable
especially on
corners, in
vertical cable
trays and when
spanning long
distances.