Signamax 100BaseTX To 100BaseFX Converters - Manual (Page 16)

Signamax 065-1100NS/1110NS/1120NS Series
100BaseTX/FX Media Converter
Installation 10
Install the converter
This Converter utilizes ports with fiber and copper port
connectors, functioning under the Fast Ethernet protocol.
100BaseTX Port
The 100BaseTX port supports a network speed of 100Mbps,
and can operate in half and full duplex transfer modes. This
port also offers MDI/MDI-X crossover detection that gives
true "plug and play" capability - just plug in the network
cable to the port and adjust the push-button according the
chart above. The RJ-45 connector is suitable for UTP cable
Category 3, 4, 5 or better.
100BaseFX Port
The 100BaseFX port adds a fiber Fast Ethernet link to your
network device. Compliant with IEEE 802.3u, this port can
transmit data at 100Mbps in full duplex mode across
distances of up to 2km through multimode fiber optic cable.
The fiber port has a choice of ST or SC fiber connector
types for multimode models, and SC connectors are used
on singlemode models.