Signamax 100BaseTX To 100BaseFX Converters - Manual (Page 15)

Signamax 065-1100NS/1110NS/1120NS Series
100BaseTX/FX Media Converter
Installation 9
NWay Push Button Switch Setting
Use the NWay push button switch to activate NWay
operations.
Note: Factory NWay switch default is set to the ON position.
ON: Activates the NWay auto-negotiation operation
mode. Set the NWay switch to ON when connecting
to an auto-negotiation device. The function will
determine the highest possible speed and duplex
mode in the copper segment.
OFF: Deactivates the NWay auto-negotiation operation
mode. Set the NWay switch to OFF when connecting
to an auto-sensing device that only supports 10/100
detection. Some early switch models only support
auto-sensing of speed, and NOT auto-detection of
both speed and duplex mode (auto-negotiation).
Note: Setting the duplex mode is feasible while the media
converter is “on-line”.