Pengo TruLink - Manual (Page 38)

38 PENGO TruLink Manual
CHANGING LENGTH UNITS (FEET TO METERS):
To change the recorded length (depth) unit of
measure from the default Feet to Meters go to
the Main Menu.
Select Menu located on the bottom left
of the screen. This will bring up the Main
Menu screen. 1
3
Select Menu. Under the SetUp screen
select SetUp. 2
1
2a
2b
When the SetUp screen appears select
Unit. Under the Unit screen is where
the unit of measure can be changed
from the default.
3
Located near the bottom of the Unit
screen is Length. Select the box to the
right of Length. 4
Use the Up and Down buttons located
on the bottom of the Display to change
the Length unit of measure from Feet to
Meters. Use the same process to change back
to the default setting of Feet as needed.
5
DISPLAY ADJUSTMENT GUIDE (8” DISPLAY)
4