Paxton Superchargers Dodge SRT-10 Ram User Manual

Page 22

Text mode
Original mode

6-2

P/N: 4809645
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
16JAN06 v1.2 SRT-10(4809645v1.2))

2004 Model 6-Speed:

This hose needs

to be oriented in reverse of the factory orien-
tation. Install the 1/2" hose union into the
end of the hose previously installed to the
1/2" barbed fitting in the 4" cast duct. Attach
the hose union to the factory vent hose. (See
Fig. 6-d.)

Connect the PCV valve to the factory hard
plastic line.

Locate the small rubber 90º fitting on the
passenger’s side valve cover. Remove the
fitting and set aside as it will not be reused.
(See Fig. 6-e.)

Assemble the new PCV valve assembly (See
Fig. 6-f.)

Install the PCV valve in the location of the
factory breather on the passenger’s side of
the vehicle. (See Fig. 6-g.)

Fig. 6-d

Fig. 6-e

Fig. 6-g

Fig. 6-f

FACTORY

BREATHER HOSE

TO VALVE

COVER