NEXCOM VTC 7100-C8SK - Manual (Page 81)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 67
Appendix C: Accessing the IP Cameras
VTC 71-C Series User Manual
Appendix C: Accessing the IP Cameras
(Extra Information)
▪ Subnet mask
This is used to determine if the destination is on the same subnet. The
default value is “255.255.255.0”.
▪ Web Server port
The default web server port is 80. Once the port is changed, the user
must be notified of the change for the connection to be successful. For
instance, when the Administrator changes the HTTP port from 80 to 8080
of the IP Camera which has an IP address of 192.168.1.168, the user
must type “http://192.168.1.168:8080” in the web browser instead of
“http://192.168.1.168”
Accessing Cameras for Logging in with a Static IP Address
Before proceeding or accessing the camera via a web browser, make sure the IP
address of the host computer and each camera are on the same network subnet.
For example, the original camera’s default IP address is 192.168.1.168. Host
computer have to set IP address to 192.168.1.1 and Mask to 255.255.255.0.
====================================
Local Area Network 1: 192.168.1.1
IP CAM1: 192.168.1.101
IP CAM2: 192.168.1.102
IP CAM3: 192.168.1.103
IP CAM4: 192.168.1.104
IP CAM5: 192.168.1.105
IP CAM6: 192.168.1.106
IP CAM7: 192.168.1.107
IP CAM8: 192.168.1.108
====================================