Key features, Hardware specifications – NEXCOM VTC 6120 User Manual

Page 16

VTC 6120 User Manual

Chapter 1: Product Introduction

Key Features

• Built-in Intel

Core™ 2 Duo LV processor

• Fanless design with ruggedized aluminum chassis
• 2 Mini PCI Express and 1 PCI-104 expansions
• Wide range DC input from 6V to 36V
• Power ignition on/off delay controlled by software
• Low battery power protection setting by software
• External smart battery back-up support
• S3 & S4 suspend mode support
• Availability of GPS, GPRS/UMTS/HSDPA
• Multiple display connections thru VGA, DVI-D and LVDS
• Optional IP65 enclosure
• e13 Mark certification

Hardware Specifications

COM Express CPU Module
• Intel

Core™ 2 Duo SL9400

• VGA/PCI/PCIe/LVDS/Audio/COM/LPT/USB2.0/LAN interface

Memory
• Supports DDR3 1066/1333 Mhz non-ECC, non-registered SDRAM
• One 200-pin SO-DIMM supports up to 2GB memory

Chipset
• Intel 945GME / ICH7M

Expansion
• 2 Mini PCI Express slots
- 1 x (PCIe + USB) for WLAN card
- 1 x PCIe for HSDPA module or GPRS module
• 1 PCI-104 slot
• 1 Bluetooth module (optional)

I/O Interfaces - Front
• Logo plate
• 1 x Power button (w/ LED)
• 1 x Reset button
• 1 x SIM card socket
• 1 x USB 2.0
• 1 x Power LED
• 1 x HDD LED
• 1 x GPIO LED - programmable for alarm or other application specific pur-

poses

• 1x LED for COMM (WLAN/HSDPA) status
• Antenna mounting holes for 4x SMA-type (WLAN, HSDPA and Bluetooth)
• 1 x Line-out
• 1 x Mic-in