NEXCOM NViS 6220 User Manual

Page 78

NViS 6210 / 6220 User Manual

Chapter 3: System Setup

Save & Exit

Save Changes and Exit

To save the changes and exit the Setup utility, select this field then press
. A dialog box will appear. Confirm by selecting Yes. You can also
press to save and exit Setup.

Discard Changes and Exit

To exit the Setup utility without saving the changes, select this field then
press . You may be prompted to confirm again before exiting. You
can also press to exit without saving the changes.

Save Changes and Reset

To save the changes and reset, select this field then press . A dialog
box will appear. Confirm by selecting Yes.

Discard Changes and Reset

To exit the Setup utility without saving the changes, select this field then
press . You may be prompted to confirm again before exiting.

Save Changes

To save changes and continue configuring the BIOS, select this field then
press . A dialog box will appear. Confirm by selecting Yes.

Discard Changes

To discard the changes, select this field then press . A dialog box
will appear. Confirm by selecting Yes to discard all changes made and
restore the previously saved settings.

Restore Defaults

To restore the BIOS to default settings, select this field then press .
A dialog box will appear. Confirm by selecting Yes.

Save as User Defaults

To use the current configurations as user default settings for the BIOS,
select this field then press . A dialog box will appear. Confirm by
selecting Yes.